Darkly Labs Community

Thought i would try a slate tile too


That looks good Caroline. What program and settings did you use?


hi mark, i made the vector in Adobe Illustrator and used cut2d. the only setting i changed was to reduce the speed to 3mm/sec from default 10. Power at 100%,  one pass. The engraving is a bit off centre, but you can feel the lines quite easily, so it got a bit of depth.  heres a link to the file if you what to try it,  https://drive.google.com/file/d/0BxLzrcciHV1-MW9nNGNjalpwd0U/view?usp=sharing

and heres another mandala file also, not so complex



Thanks Caroline!