Darkly Labs Community

Setup Process Question

Hey guys, so I have just finished installing the air assist system. My question is:

 

Do I leave the laser carriage (and etc) in the bottom right corner where it was positioned during the air-assist installation or do I move it back to the top-left corner where it was originally positioned before I plug the power in and get the setup process started?

Leave it where it is Katherine.  The laser carriage will return to the top left corner once power is applied.  This position is the home position and is a reference point. The machine will always home when powered up regardless of where the laser carriage is currently positioned.

Thanks Daryl. I wasn’t sure if it was necessary for the initial setup. Thank you again.