Darkly Labs Community

Rcommanded settings for 3.6mm Oak Hardwood

Can anybody recommend cutting settings for 3.6mm Oak

 

I am having to cut about 12 times.

My setting are:-

powerd 100

cut depth 0.2

Start height 12.5

cuts 12

speed 150

 

regards

 

Alan

 

Alan,

 

3.6mm is probably getting on the upper limit of what you can achieve.  The settings look OK.

Not sure of the characteristics of Oak but I can tell you that some timbers are harder to cut than others and in fact some timbers wont cut at all.