Darkly Labs Community

Lasering on denim

So nothing is safe from the laser now.  Thought i would try it out on denim.  Love the result. Seems to just take the color out. Power at 20%.  cheers

1 Like

Nice one!

Time to start working on  the Darkly Labs jeans for our store!

Domenic

Hi Caroline

What feed rate did you use?

Joel.

hi joel, i was using cut2d default feedrate which i think is 10mm/sec.  i recommend a test on the fabric as i cut through the first try.  I find somewhere between 15 to 20% power on my 4watt depending on the material.  cheers

Thanks Caroline…